1/8 in. Stainless Steel Cable Assembly – Rapid Lock to Stud – Multiple Lengths

Madden Industries – Stainless Steel Cable Railing Assembly Rapid Lock to Stud with Pre-swaged Cable Stud on One Side.

• Use with your choice of post (perfect for aluminum, steel, and wooden posts), works great when passing cable through posts, makes for a fast assembly.
• One cable side will be factory swaged with a threaded stud; other side will use the Rapid Lock to pre-tension the cable (no swaging tool required) cut cable to length and install caps.
• Choice of 3.75 in. stud, 7.5 in. stud, or 10 in. stud.  (Posts 3-1/8 in. thick and less – use 3.75 in. length stud; posts greater the 3-9/64 in. to 7.0 in. should use the 7.5 in. stud) Larger studs available, call for details.
• Tension using the included tensioning nut on the threaded stud side.
• Offer is per cable, if using with our aluminum frames, 9 cables will be required for 36 in. installed height railing, or 11 cables for 42 in. installed heights.
• T316 Grade Stainless Fittings – Excellent Corrosive Resistant Properties.  (Threaded Stud, Caps, Rapid Lock, Washers, Tensioning Nut – All T316 Grade Stainless)
• T316L Stainless Steel Low Carbon Cable Included.  (1×19 Construction)
• Kit includes: (1) Length of cable, (1) Pre-swaged stud of choice with tensioning nut, (1) washers, (2) end caps, (1) Rapid Lock.
• Recommended cable spacing not to exceed 3.0 in. on center.
• Shipping calculated at checkout (orders over $249 ship free)

Pre-swaged assemblies are subject to special order lead times and return policies.

Price is per cable.  Measure your run (outside post to outside post), order the assembly larger than the opening measurement.  Example, an 8ft opening will use a 10ft cable assembly.

Other assembly fittings are available, call for details.