Description
Jaw and stud closed body turnbuckle in T316 stainless steel, with a hand swage or machine swage stud that has wrench flats. Choose the cable diameter and thread size, then thread layout A or B to set which end has the right hand thread. The drawing and table below give the dimensions.
Dimensions by Size
| Part No. | Swage | C: Cable size | A: Thread | B | D | E | P |
|---|---|---|---|---|---|---|---|
| MT6PBHSJST14-18A MT6PBHSJST14-18B |
Hand Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.42″ | 0.44″ | 0.23″ |
| MT6PBHSJST14-316A MT6PBHSJST14-316B |
Hand Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.42″ | 0.44″ | 0.23″ |
| MT6PBHSJST516-14A MT6PBHSJST516-14B |
Hand Swage | 1/4″ | 5/16″-18 | 4-5/32″ | 0.45″ | 0.46″ | 0.31″ |
| MT6PBMSJST14-18A MT6PBMSJST14-18B |
Machine Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.42″ | 0.44″ | 0.23″ |
| MT6PBMSJST14-316A MT6PBMSJST14-316B |
Machine Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.42″ | 0.44″ | 0.23″ |
| MT6PBMSJST516-316A MT6PBMSJST516-316B |
Machine Swage | 3/16″ | 5/16″-18 | 3-3/4″ | 0.42″ | 0.44″ | 0.23″ |
| MT6PBMSJST516-14A MT6PBMSJST516-14B |
Machine Swage | 1/4″ | 5/16″-18 | 4-5/32″ | 0.45″ | 0.46″ | 0.31″ |
| MT6PBMSJST38-14A MT6PBMSJST38-14B |
Machine Swage | 1/4″ | 3/8″-16 | 4-5/32″ | 0.45″ | 0.46″ | 0.34″ |
| MT6PBMSJST12-14A MT6PBMSJST12-14B |
Machine Swage | 1/4″ | 1/2″-13 | 6.00″ | 1.00″ | 0.59″ | 0.46″ |
| MT6PBMSJST12-516A MT6PBMSJST12-516B |
Machine Swage | 5/16″ | 1/2″-13 | 5-7/8″ | 0.75″ | 0.59″ | 0.50″ |
| MT6PBMSJST58-38A MT6PBMSJST58-38B |
Machine Swage | 3/8″ | 5/8″-11 | 7-5/8″ | 1.34″ | 0.69″ | 0.62″ |
All dimensions in inches unless noted. C = Cable size. A = Thread. B, D, E and P are as shown on the drawing. Each row applies to both thread layouts, A and B. The machine swage 3/4 in. thread size (1/2 in. cable, layout A only) is not listed in the dimensions table.
Reviews
There are no reviews yet.