Description
Toggle and wrench flat stud closed body turnbuckle in T316 stainless steel, with a hand swage or machine swage stud. Choose the swage type, cable diameter and thread layout A or B (which end has the right hand thread). The drawing and table below give the dimensions.
Tensioning: Layout A has a left hand thread on the stud end, so turn the turnbuckle body counterclockwise to tension. Layout B has a right hand thread on the stud end, so turn the body clockwise to tension.
Dimensions by Size
| Part No. | Swage | C: Cable size | A: Thread | B | D | E | P |
|---|---|---|---|---|---|---|---|
| MT6PBHSTST14-18A MT6PBHSTST14-18B |
Hand Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBHSTST14-316A MT6PBHSTST14-316B |
Hand Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBHSTST516-14A MT6PBHSTST516-14B |
Hand Swage | 1/4″ | 5/16″-18 | 4-5/32″ | 0.72″ | 0.55″ | 0.31″ |
| MT6PBMSTST14-18A MT6PBMSTST14-18B |
Machine Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBMSTST14-316A MT6PBMSTST14-316B |
Machine Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBMSTST516-14A MT6PBMSTST516-14B |
Machine Swage | 1/4″ | 5/16″-18 | 4-5/32″ | 0.72″ | 0.55″ | 0.31″ |
All dimensions in inches unless noted. C = Cable size. A = Thread. B, D, E and P are as shown on the drawing. Each row applies to both thread layouts, A and B. The machine swage 1/2 in. thread (5/16 in. cable) and 3/4 in. thread (1/2 in. cable) sizes, layout A only, are not listed in the dimensions table.
Reviews
There are no reviews yet.