Description
Drop pin cable stud in T316 stainless steel for 1/8 in. or 3/16 in. cable, with a hand swage or machine swage end. Choose the swage type, cable diameter and style (standard or short). The photo below shows the standard and short styles side by side, and the drawing and table give the dimensions.
Drop pin studs must be installed inside a cable frame. They can be used on ground level or deck projects. Not for overhead or human support.
Standard vs Short
The standard style is the longer stud (L is 3-3/4 in. on 1/8 in. cable, hand swage and machine swage, and 4 in. on 3/16 in. cable, hand swage). The short style is 2-1/4 in. long (L) on both cable sizes, in hand swage and machine swage.
Dimensions by Size
| Part No. | Swage | Style | A: Cable size | H | L |
|---|---|---|---|---|---|
| MT6HDPST-18 | Hand Swage | Standard | 1/8″ | 1/4″ | 3-3/4″ |
| MT6HDPST-316 | Hand Swage | Standard | 3/16″ | 1/4″ | 4″ |
| MT6HDPST-18S | Hand Swage | Short | 1/8″ | 1/4″ | 2-1/4″ |
| MT6HDPST-316S | Hand Swage | Short | 3/16″ | 1/4″ | 2-1/4″ |
| MT6MDPST-18 | Machine Swage | Standard | 1/8″ | 1/4″ | 3-3/4″ |
| MT6MDPST-18S | Machine Swage | Short | 1/8″ | 1/4″ | 2-1/4″ |
| MT6MDPST-316S | Machine Swage | Short | 3/16″ | 1/4″ | 2-1/4″ |
All dimensions in inches unless noted. A = Cable size. H and L are as shown on the drawing. Each row is one swage type, style and cable size.
Reviews
There are no reviews yet.