Description
Stem head cable stud in T316 stainless steel for 1/8 in. or 3/16 in. cable, with a hand swage or machine swage end and a 1/4 in. thread (standard 1/4 in.-20 or fine 1/4 in.-28). Choose the swage type, cable diameter and thread. Use with a stem head receiver. The drawing and table below give the dimensions.
Dimensions by Size
| Part No. | Swage | A: Cable size | B | C: Thread | L |
|---|---|---|---|---|---|
| MT6HSTMSTD14-18 | Hand Swage | 1/8″ | 9/16″ | 1/4″-20 | 2-5/8″ |
| MT6HSTMSTD14-316 | Hand Swage | 3/16″ | 9/16″ | 1/4″-20 | 2-5/8″ |
| MT6HSTMSTD14-18UNF | Hand Swage | 1/8″ | 9/16″ | 1/4″-28 | 2-5/8″ |
| MT6HSTMSTD14-316UNF | Hand Swage | 3/16″ | 9/16″ | 1/4″-28 | 2-5/8″ |
| MT6MSTMSTD14-18 | Machine Swage | 1/8″ | 9/16″ | 1/4″-20 | 2-5/8″ |
| MT6MSTMSTD14-316 | Machine Swage | 3/16″ | 9/16″ | 1/4″-20 | 2-5/8″ |
| MT6MSTMSTD14-18UNF | Machine Swage | 1/8″ | 9/16″ | 1/4″-28 | 2-5/8″ |
| MT6MSTMSTD14-316UNF | Machine Swage | 3/16″ | 9/16″ | 1/4″-28 | 2-5/8″ |
All dimensions in inches unless noted. A = Cable size. C = Thread. B and L are as shown on the drawing. Each row is one swage type, cable size and thread.
Reviews
There are no reviews yet.