Description
Deck toggle and life line stud closed body turnbuckle in T316 stainless steel, with a hand swage or machine swage stud. Choose the cable diameter, standard or fine thread (UNF), then thread layout A or B to set which end has the right hand thread. The drawing and table below give the dimensions.
Tensioning: Layout A has a left hand thread on the stud end, so turn the turnbuckle body counterclockwise to tension. Layout B has a right hand thread on the stud end, so turn the body clockwise to tension.
Dimensions by Size
| Part No. | Swage | C: Cable size | A: Thread | B | D |
|---|---|---|---|---|---|
| MT6PBHLDTST14-18A MT6PBHLDTST14-18B |
Hand Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.25″ |
| MT6PBHLDTST14-18UNFA MT6PBHLDTST14-18UNFB |
Hand Swage | 1/8″ | 1/4″-28 | 3-3/4″ | 0.25″ |
| MT6PBHLDTST14-316A MT6PBHLDTST14-316B |
Hand Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.25″ |
| MT6PBHLDTST14-316UNFA MT6PBHLDTST14-316UNFB |
Hand Swage | 3/16″ | 1/4″-28 | 3-3/4″ | 0.25″ |
| MT6PBHLDTST516-14A MT6PBHLDTST516-14B |
Hand Swage | 1/4″ | 5/16″-18 | 4-5/32″ | 0.25″ |
| MT6PBMLDTST14-18A MT6PBMLDTST14-18B |
Machine Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.25″ |
| MT6PBMLDTST14-18UNFA MT6PBMLDTST14-18UNFB |
Machine Swage | 1/8″ | 1/4″-28 | 3-3/4″ | 0.25″ |
| MT6PBMLDTST14-316A MT6PBMLDTST14-316B |
Machine Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.25″ |
| MT6PBMLDTST14-316UNFA MT6PBMLDTST14-316UNFB |
Machine Swage | 3/16″ | 1/4″-28 | 3-3/4″ | 0.25″ |
| MT6PBMLDTST516-14A MT6PBMLDTST516-14B |
Machine Swage | 1/4″ | 5/16″-18 | 4-5/32″ | 0.25″ |
All dimensions in inches unless noted. C = Cable size. A = Thread. B and D are as shown on the drawing. Each row applies to both thread layouts, A and B.
Reviews
There are no reviews yet.