Description
Drop pin and wrench flat stud closed body turnbuckle in T316 stainless steel for 1/8 in. or 3/16 in. cable. Choose thread layout A or B to set which end has the right hand thread (hand swage comes in layout A only). The drawing and table below give the dimensions.
Tensioning: Layout A has a left hand thread on the stud end, so turn the turnbuckle body counterclockwise to tension. Layout B has a right hand thread on the stud end, so turn the body clockwise to tension.
Drop pin turnbuckles must be installed inside a cable frame. They can be used on ground level or deck projects. Not for overhead or human support.
Dimensions by Size
| Part No. | Swage | C: Cable size | A: Thread | B | H |
|---|---|---|---|---|---|
| MT6PBHSDPST14-18A | Hand Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.212″ |
| MT6PBHSDPST14-316A | Hand Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.25″ |
| MT6PBMSDPST14-18A MT6PBMSDPST14-18B |
Machine Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.212″ |
| MT6PBMSDPST14-316A MT6PBMSDPST14-316B |
Machine Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.25″ |
All dimensions in inches unless noted. C = Cable size. A = Thread. B and H are as shown on the drawing. Each machine swage row applies to both thread layouts, A and B.
Reviews
There are no reviews yet.