Description
Toggle and life line stud closed body turnbuckle in T316 stainless steel, with a hand swage or machine swage stud. Choose the cable diameter, standard or fine thread (UNF), then thread layout A or B to set which end has the right hand thread. The drawing and table below give the dimensions.
Tensioning: Layout A has a left hand thread on the stud end, so turn the turnbuckle body counterclockwise to tension. Layout B has a right hand thread on the stud end, so turn the body clockwise to tension.
Dimensions by Size
| Part No. | Swage | C: Cable size | A: Thread | B | D | E | P |
|---|---|---|---|---|---|---|---|
| MT6PBHLTST14-18A MT6PBHLTST14-18B |
Hand Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBHLTST14-18UNFA MT6PBHLTST14-18UNFB |
Hand Swage | 1/8″ | 1/4″-28 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBHLTST14-316A MT6PBHLTST14-316B |
Hand Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBHLTST14-316UNFA MT6PBHLTST14-316UNFB |
Hand Swage | 3/16″ | 1/4″-28 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBHLTST516-14A MT6PBHLTST516-14B |
Hand Swage | 1/4″ | 5/16″-18 | 4-5/32″ | 0.72″ | 0.55″ | 0.31″ |
| MT6PBMLTST14-18A MT6PBMLTST14-18B |
Machine Swage | 1/8″ | 1/4″-20 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBMLTST14-18UNFA MT6PBMLTST14-18UNFB |
Machine Swage | 1/8″ | 1/4″-28 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBMLTST14-316A MT6PBMLTST14-316B |
Machine Swage | 3/16″ | 1/4″-20 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBMLTST14-316UNFA MT6PBMLTST14-316UNFB |
Machine Swage | 3/16″ | 1/4″-28 | 3-3/4″ | 0.70″ | 0.41″ | 0.23″ |
| MT6PBMLTST516-14A MT6PBMLTST516-14B |
Machine Swage | 1/4″ | 5/16″-18 | 4-5/32″ | 0.72″ | 0.55″ | 0.31″ |
All dimensions in inches unless noted. C = Cable size. A = Thread. B, D, E and P are as shown on the drawing. Each row applies to both thread layouts, A and B.
Reviews
There are no reviews yet.